CTS Linear Taper Pot (Split-Shaft)
CTS 'USA spec'Â Linear Taper Potentiometer.
The CTS audio taper gives you smoother and more accurate response than with economy pots. Featuring a aluminium thread and split-shaft.
Specs:
- USA spec thread: 3/8" x 32.
- 3/8" (9.5mm) diameter threaded collar.
- 24 spline (fine) split shaft.
- Includes 1 x nut, 1 x dress washer and 1 x lock washer.
Â
Dimensions:
- The brass threaded collar is 9.5mm long.
- Total length of the shaft to the top of the spline is 18mm.
- Split shaft diameter : 6mm.
- Pot casing diameter : 24mm.
Linear taper pots can be used for tone controls.
Â
Which Ohm value should you choose?
500k pots are the standard volume and tone controls for humbuckers, and 250k's are usually used for single-coil pickups. A 250k gives a slightly warmer tone than a 500k by sending more of the high-frequencies in the circuit to ground.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
CTS Linear Taper Pot (Split-Shaft)
CTS Linear Taper Pot (Split-Shaft)
CTS 'USA spec'Â Linear Taper Potentiometer.
The CTS audio taper gives you smoother and more accurate response than with economy pots. Featuring a aluminium thread and split-shaft.
Specs:
- USA spec thread: 3/8" x 32.
- 3/8" (9.5mm) diameter threaded collar.
- 24 spline (fine) split shaft.
- Includes 1 x nut, 1 x dress washer and 1 x lock washer.
Â
Dimensions:
- The brass threaded collar is 9.5mm long.
- Total length of the shaft to the top of the spline is 18mm.
- Split shaft diameter : 6mm.
- Pot casing diameter : 24mm.
Linear taper pots can be used for tone controls.
Â
Which Ohm value should you choose?
500k pots are the standard volume and tone controls for humbuckers, and 250k's are usually used for single-coil pickups. A 250k gives a slightly warmer tone than a 500k by sending more of the high-frequencies in the circuit to ground.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
CTS 'USA spec'Â Linear Taper Potentiometer.
The CTS audio taper gives you smoother and more accurate response than with economy pots. Featuring a aluminium thread and split-shaft.
Specs:
- USA spec thread: 3/8" x 32.
- 3/8" (9.5mm) diameter threaded collar.
- 24 spline (fine) split shaft.
- Includes 1 x nut, 1 x dress washer and 1 x lock washer.
Â
Dimensions:
- The brass threaded collar is 9.5mm long.
- Total length of the shaft to the top of the spline is 18mm.
- Split shaft diameter : 6mm.
- Pot casing diameter : 24mm.
Linear taper pots can be used for tone controls.
Â
Which Ohm value should you choose?
500k pots are the standard volume and tone controls for humbuckers, and 250k's are usually used for single-coil pickups. A 250k gives a slightly warmer tone than a 500k by sending more of the high-frequencies in the circuit to ground.
